|
MBD-X11SCL-F | X11SCL-F |
Physical Stats |
Form Factor | microATX |
Dimensions | 9.6" x 9.6" (24.38cm x 24.38cm) |
Processor/Cache |
CPU | 8th/9th Generation Intel® Corei3/Pentium®/Celeron® Processor, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor. |
Single Socket LGA-1151 (Socket H4) supported, CPU TDP support Up to 95W TDP |
Cores / Cache | 6 cores, 12 threads |
Note | BIOS version 1.0b or above is required to support Intel® Xeon® E-2200 and 9th Generation Intel® Core i3/Pentium®/Celeron® Processors |
System Memory |
Memory Capacity | Up to 128GB Unbuffered ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots |
Memory Type | 2667/2400/2133MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
On-Board Devices |
Chipset | Intel® C242 |
SATA | Intel® C242 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10 |
IPMI | ASPEED AST2500 |
Network Controllers | Dual LAN with 1GbE with Intel® I210 |
Graphics | Aspeed AST2500 BMC |
Input / Output |
USB | 6 USB 2.0 ports (2 rear + 4 via headers) |
5 USB 3.1 Gen1 ports (2 Rears Type A, 2 via headers, 1 Type A) |
Video Output | 1 VGA port |
Serial Port / Header | 2 COM Ports (1 rear, 1 header) |
TPM | 1 TPM Header |
|
PCI-E | 1 PCI-E 3.0 x8 (in x16 slot), |
2 PCI-E 3.0 x4 (in x8 slot) |
M.2 | M.2 Interface: 1 PCI-E 3.0 x4 |
Form Factor: 2280/22110 |
Key: M-Key |
Double Height Connector |
System BIOS |
BIOS Type | UEFI 256Mb |
BIOS Features | ACPI 6.0 |
SMBIOS 2.7 |
Plug and Play (PnP) |
RTC (Real Time Clock) Wakeup |
UEFI 2.7 |
USB Keyboard support |
PCI 3.0 |
Management |
Software | IPMI2.0, KVM with dedicated LAN, SSM, SUM, SuperDoctor® 5 |
Power Configurations | ACPI Power Management |
Power-on mode for AC power recovery |
PC Health Monitoring |
Voltage | +12V, +3.3V, +5V, +5V standby, 5 -fan status, Chassis intrusion header, Chipset Voltage, Memory Voltages, Monitors CPU voltages, Supports system management utility, System level control, VBAT |
FAN | 5x 4-pin fan headers (up to 5 fans), 5 fans with tachometer status monitoring, Overheat LED indication, PWM fan speed control, Thermal control tachometer fan connectors |
Temperature | Thermal Monitor 2 (TM2) support, CPU thermal trip support, PECI, Monitoring for CPU and chassis environment |
LED | CPU / System Overheat LED, UID/Remote UID |
Other Features | ACPI power management, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Dual Cooling Zones, M.2 NGFF connector, UID, WOL |
Operating Environment |
Operating Temperature Range | 0°C ~ 50°C (32°F ~ 122°F) |
Non-Operating Temperature Range | -40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range | 8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range | 5% - 95% (non-condensing) |